The tyre is presented in a bespoke, museum-standard vitrine, conceived and built for this piece alone. Thick crystal panels, cut and polished to exacting tolerances, enclose the tyre on all sides and give an uninterrupted view of the race-worn rubber and Senna's signature from every angle. They are held within a heavy, mirror-polished chromed frame whose crisp mitred corners and flawless plating reflect the standard of fabrication throughout.

Inside, the tyre rests on discreet clear cradles, so that it appears almost to float above the illuminated floor of the case. Integrated warm lighting, with recessed spotlights overhead and concealed perimeter strips, draws out the texture of the tread, the yellow Goodyear Eagle lettering and the white signature against a deep black backdrop. Above the tyre, the McLaren International Certificate of Authenticity is mounted in its own polished frame, so that artefact and provenance are read together as a single composition.

The vitrine stands on a stepped, gloss-black plinth with a lit base, giving the whole piece the presence of a gallery installation. It is as suited to a private collection or a corporate reception as to a museum floor, and it arrives ready to display.

Goodyear Eagle Race-Used Slick Tyre — 1993 Brazilian Grand PrixDriven by Ayrton Senna aboard the Marlboro McLaren Honda MP4/8Hand Signed & Accompanied by McLaren International Certificate of Authenticity

An artefact of profound historical and emotional significance, this full-size Goodyear Eagle slick tyre was fitted to the Marlboro McLaren Honda MP4/8 and used in competition by Ayrton Senna at the 1993 Brazilian Grand Prix — the opening round of the Formula One World Championship season, held at the Autodromo José Carlos Pace, Interlagos, São Paulo.

The Tyre

A full-dimension F1 slick, the tyre retains its authentic race-worn condition — the rubber surface bearing the telltale heat cycling and wear marks consistent with Grand Prix competition use. The iconic GOODYEAR EAGLE lettering in bold yellow stands proud across the sidewall, with original team markings and compound identifiers still visible.

Signed directly onto the tyre in white marker, Senna's signature is accompanied by the year "93" and the inscription "Brazil" — a deeply personal dedication to his home race, in front of his beloved Brazilian fans, on a day that would etch itself permanently into Formula One folklore.

1991 Ayrton Senna Tribute Ensemble

Replica Rheos Helmet, OMP Gloves, OMP Race Suit & Balaclava
Presented in a Bespoke Chrome & Crystal Collector's Table

A visually striking and highly evocative Ayrton Senna tribute ensemble, faithfully capturing the unmistakable presence of the three-time Formula One World Champion during his dominant McLaren-Honda era of the early 1990s.

This complete display set comprises a period-correct style racing suit, helmet, gloves, and balaclava, presented together to recreate the iconic image of Senna at the height of his career.

The Helmet

At the heart of the ensemble is a Rheos-branded full-face helmet, finished in Senna's legendary livery:

• Vivid canary yellow base
• Signature green and blue banding
• Sponsor detailing including:
  • Nacional
  • Boss
  • Honda
  • Rheos

The proportions, striping, and sponsor placement closely mirror those worn by Senna during the 1990–1991 championship seasons, offering an immediately recognizable visual identity synonymous with Formula One's golden era.

The Race Suit

The accompanying OMP race suit is finished in classic McLaren Marlboro red, featuring period sponsor embroidery:

• Marlboro
• Honda
• Shell
• Boss
• Nacional
• TAG Heuer

Additional details include:

• White contrast stitching in correct period pattern
• "Ayrton Senna" script embroidery to the belt
• Brazilian flag insignia
• FIA homologation patch consistent with late-1980s / early-1990s standards

The suit captures the silhouette and branding layout of the suits worn by Senna during his 1991 World Championship-winning season.

Gloves

Completing the set are:

• OMP racing gloves in red with white palm inserts, consistent with early 1990s racewear styling

The Display: Chrome & Crystal Collector's Table

The ensemble is presented in a bespoke low table of mirror-polished chrome and thick crystal, designed to serve as a centrepiece coffee table as much as a showcase. Viewed from above, the full set reads at a glance: helmet, gloves and suit laid out as a driver's kit, sealed beneath a single slab of crystal.

The table:

• Thick, clear crystal top with polished edges, forming a usable table surface over the full display
• Crystal side walls on all four sides, so the pieces are visible from every seat in the room
• Mirror-polished chrome base with a recessed plinth, giving the table a floating appearance
• Polished chrome corner posts and fixings
• Black carbon-weave display bed, setting off the red of the suit and the yellow of the helmet
• Warm perimeter lighting, reflected in the chrome and crystal

The layout:

• Helmet: set upright in its own raised crystal compartment, facing the viewer
• Gloves: laid as a crossed pair in a separate crystal tray beneath the helmet
• Race suit: laid flat across the main bay, chest and sleeve embroidery fully visible, with the "Ayrton Senna" script belt and Brazilian flag along the front edge

Dimensions: approximately 220 cm× 80 cm× 55 cm.

When assembled, the set delivers a near full-scale representation of Ayrton Senna's race-day identity, in a piece of furniture that can be lived with every day.

Condition

• Helmet: Excellent cosmetic condition, with high-quality finish and sponsor application
• Suit: Clean and well-preserved
• Gloves: Display condition

Important Note

This is a tribute / display ensemble and not race-worn by Ayrton Senna. It is intended as a collector's display piece celebrating one of Formula One's most iconic drivers.

The display table is a contemporary bespoke piece, made to present this ensemble. It is not a period item.

Collector Significance

Few visual identities in motorsport are as instantly recognizable as Ayrton Senna's. Presented in chrome and crystal, this ensemble becomes a single statement piece for a private collection, showroom or lounge.

"THE TRINITY": A CHAMPIONS' HELMET DISPLAY TABLE
Ayrton Senna, Michael Schumacher and Lewis Hamilton, three signed and limited replica helmets presented in a bespoke chrome and crystal table
120 × 60 × 55 cm

Three Legends, One Table

Between them, these three drivers hold twenty World Championship titles and many of the sport's greatest records. Ayrton Senna, Michael Schumacher and Lewis Hamilton are often named as the finest drivers in Formula One history. This table brings them together for the first time in one collector's display, each represented by a significant helmet from a defining season.

The Helmets

1994 Ayrton Senna, Replica Bell M3 Racing Helmet, signed and dated "Brazil"
The helmet is finished in Senna's famous yellow, green and blue design, which he wore from his karting days to his last race. It carries the 1994 Williams-Renault livery with Rothmans, Renault, Elf and Nacional branding. It was Senna's last season, which gives the helmet deep emotional weight. It is signed and inscribed "Brazil," a tribute to the country that adored him.

2000 Michael Schumacher, F1 World Championship Bell Replica Helmet, signed
This helmet commemorates one of the most important seasons in Ferrari's history. In 2000, Schumacher ended Maranello's 21-year wait for a Drivers' title, the first since Jody Scheckter in 1979. It was the first of five consecutive championships with the Scuderia. The scarlet design carries the Marlboro and Prancing Horse livery of the era and is signed by Schumacher.

2019 Lewis Hamilton, Official Bell Replica Helmet, Limited Edition 13 of 19
Hamilton won his sixth World Championship with Mercedes-AMG Petronas in 2019, a step toward equalling Schumacher's record of seven. The helmet carries his white, red and gold "44" design with Mercedes and Petronas branding. It is an official limited edition, number 13 of only 19.

Design and Craftsmanship

The table is built from polished chrome and crystal to a museum-display standard. Each helmet sits in its own crystal-clear display case, lit from within to show every detail of the livery and signature. Each case stands on a black plinth with a brushed-gold nameplate and the driver's national flag: Great Britain, Brazil and Germany. The mirrored chrome frame has clean, architectural lines and supports a thick crystal glass top, so the three helmets can be seen from every angle. At 120 cm long, 60 cm wide and 55 cm high, it works as a coffee table in a refined living room as well as a centrepiece in a collector's showroom or office.

Specifications

• Dimensions: 120 cm (L) × 60 cm (W) × 55 cm (H)
• Frame: Polished chrome
• Top: Thick crystal glass
• Display: Three individual illuminated crystal cases with named plinths and national flags
• Helmets:
• 1994 Ayrton Senna Replica Bell M3, signed and dated "Brazil"
• 2000 Michael Schumacher F1 World Championship Bell Replica, signed
• 2019 Lewis Hamilton Official Bell Replica, Limited Edition 13/19

A Note for Collectors

The table tells the story of Formula One's modern era: Senna's genius, Schumacher's dominance and Hamilton's record-breaking career. Signed pieces from all three in one display rarely appear together. This is both a serious collection of memorabilia and a striking piece of furniture.

"DAS ORIGINAL": A VOLKSWAGEN TYPE 1 AIR-COOLED FLAT-FOUR COFFEE TABLE
Vintage Volkswagen Beetle boxer engine on a circular chromed base, under round crystal glass
Made to order

The Engine That Put the World on Wheels

Few machines have touched as many lives as this one. At the heart of this table is a vintage Volkswagen Type 1 air-cooled flat-four, the engine behind the Beetle. It was designed in the 1930s by Ferdinand Porsche's engineering office, and for more than half a century it was one of the most familiar sounds in the world.

Its layout is simple and clever. Four horizontally opposed cylinders are cooled by air alone, with no radiator, no water pump and no coolant. The result was an engine light, robust and simple enough to be repaired by the roadside with a handful of tools. That design powered more than 21 million Beetles, built from Wolfsburg to Puebla, where the last one left the line in 2003. The same engine also drove the Type 2 bus, the Karmann Ghia, countless dune buggies, and the Formula Vee racing series that started the careers of future Grand Prix drivers. Its principles were carried into the earliest Porsche 356, making it a direct ancestor of every air-cooled Porsche that followed.

A Piece of Art

This table presents the flat-four as a centrepiece, seen from every angle. The finned black cylinder barrels spread out symmetrically on each side. They are topped by polished cylinder heads and chromed valve covers, and joined at the center by the split aluminium crankcase. From above, the engine forms a perfect cross, framed by the circle of glass. At the rear, the machined flywheel with its toothed ring gear shows the engineering in its purest form. A German tricolour badge on the crankcase points to where it came from.

The engine rests on a circular chromed platform fitted with integrated lighting that lifts the engine's contours from below. Four polished chrome columns support a thick round crystal glass top on chromed standoffs. The round shape softens the mechanical subject, and the result sits as comfortably in a refined living room as in a collector's garage.

Specifications

• Engine: Volkswagen Type 1 air-cooled flat-four 
• Finish: Polished and chromed cylinder heads and covers, black finned barrels, polished crankcase 
• Base: Circular chromed platform with integrated lighting
• Columns: Four polished chrome pillars
• Top: Round thick crystal glass on chromed standoffs
• Dimensions: 120 cm x 50 cm / 47.24 x 19.69 inches
• Weight: 55 kgs / 120 Lbs
• Lead time: [add, e.g. approximately three months from order]

A Note for Collectors

This is the engine that democratised the automobile, reimagined as functional sculpture. It connects the Beetle, the VW bus and the air-cooled Porsche. Each table is built around an individual vintage engine, so every piece is unique.

"MAGISTER": A TURBOMECA MARBORÉ TURBOJET COFFEE TABLE
Fully chromed Marboré turbojet in a chromed aluminium frame, under thick crystal glass
Made to order. Delivery approximately three months from commission.

The Engine That Taught France to Fly Jets

Few engines are as closely tied to the start of the jet age in Europe as the Turbomeca Marboré. This piece takes one of these historic French turbojets out of the hangar and turns it into sculpture. The engine is fully chromed, set within a chromed aluminium frame and placed beneath a thick slab of crystal glass.

Turbomeca built the Marboré from the 1950s into the 1970s. It is a single-spool turbojet with a centrifugal compressor, and the production Marboré II delivered 880 lb of thrust at 22,500 rpm. It is best known as the engine of the Fouga CM.170 Magister, the V-tailed jet trainer on which generations of French and European military pilots learned to fly. Two Marborés powered each Magister. The type was also the mount of the Patrouille de France, the French Air Force display team, for much of the 1960s and 1970s.

The engine powered several other aircraft. Two Marboré IIs were fitted side by side in the rear fuselage of the Morane-Saulnier MS.760 Paris, the four-seat liaison jet sometimes called one of the first business jets. Other types included the Fouga CM.175 Zéphyr, the naval version of the Magister, and the Nord CT20 target drone. In Spain, ENMASA built the Marboré II under licence as the Marboré M21, and it powered the Hispano HA-200 Saeta, the first jet designed in Spain. By June 1978, 4,344 Marborés had been delivered.

A Piece of Art

The engine's working anatomy has been fully chromed, turning it into a mirror-bright sculpture. The pointed intake cone leads into the compressor casing and a dense network of fuel lines, braided hoses, fittings and ancillaries, then on to the tapered exhaust. Every rivet line and flange catches the light. Under the glass it is visible from every angle, like an exhibit in a museum case.

The frame is made of polished chromed aluminium, with clean architectural lines that echo the precision of the engine. The thick crystal glass top is held on chromed standoffs so that it appears to float above the turbine. Seen from the side, the table has the proportions of an aircraft in flight. Seen from above, it offers a full cutaway view of French aero-engineering.

It is at home in a contemporary living room, an executive office, a private hangar or a collector's showroom.

Specifications

• Engine: Turbomeca Marboré turbojet, fully chromed [add variant and serial number if known]
• Frame: Chromed aluminium
• Top: Thick crystal glass on chromed standoffs
• Dimensions: 200 cm x 80 cms x 80 cms / 78.74 in x 31.50 in x 31.50 in
• Weight: 75 kgs / 165 Lbs
• Lead time: Approximately three months from order

A Note for Collectors

Each table is built around an individual engine, so no two are exactly the same. This is aviation heritage turned into functional art: the engine that trained France's jet pilots, reinterpreted for the modern interior.

Ferrari SF-26 — Full-Scale (1:1) Show Car Replica

Lewis Hamilton Tribute · Car No. 44 · 2026 Red & White Livery

Museum-grade resin and fiberglass construction — Hamilton's Ferrari for Formula 1's new era, recreated at full scale in the season's most talked-about livery.

Presented here is a striking full-size (1:1) show car replica of the Ferrari SF-26 in the specification of Lewis Hamilton, Car No. 44 — the machine carrying the seven-time World Champion into Formula 1's radical 2026 regulation era. Unveiled at Fiorano in January 2026, the SF-26 broke from a decade of all-red Ferraris with a dramatic red-and-white colour scheme, its stark white engine cover deliberately echoing the legendary 312T cars of the Lauda era — instantly one of the most distinctive and celebrated liveries on the modern grid.

The subject could hardly be more current. The SF-26 is Ferrari's clean-sheet answer to the sport's biggest regulation reset in a generation — lighter, more compact cars with active aerodynamics and a new-generation hybrid power unit — and the car on which Hamilton's pursuit of a record eighth world title with the Scuderia rests. This is not a nostalgia piece: it is the sport's biggest story of the moment, rendered at full size.

The Replica

Hand-built in resin and fiberglass over a rigid internal framework, this display piece faithfully reproduces the SF-26's silhouette and launch-specification livery. Highlights include:

• Full-scale dimensions true to the footprint of the new-generation Formula 1 car
• 2026 launch livery faithfully applied — intense Rosso red over the white engine cover, with sponsor-style markings throughout including HP, Shell, UniCredit, Richard Mille, IBM, CEVA, Ray-Ban, and Pirelli-branded detailing
• Race No. 44 on the engine cover and nose in Hamilton specification
• Carbon-effect aerodynamic detailing across the front wing assembly, floor edges, sidepod undercuts, and rear wing endplates
• Halo-equipped cockpit with mirrors, headrest surround, and replica onboard camera detail
• Display wheels and slick-profile tyres with P Zero-style yellow branding

At full scale, the modern F1 silhouette is a genuinely imposing object — low, wide, and sculpted from nose to diffuser — making this an exceptional centrepiece for a showroom, dealership, private collection, office lobby, or hospitality venue. The white-and-red scheme in particular displays beautifully under gallery lighting.

Condition & Provenance Disclosure

This is a static display replica, newly constructed in resin and fiberglass. It is not a race-used or ex-team chassis, contains no running mechanical components, and is not affiliated with, licensed by, or endorsed by Scuderia Ferrari, Formula 1, or Lewis Hamilton. Liveries and markings are applied in tribute style for display purposes only. It is offered strictly as a collector's display piece.

The car is structurally sound and suitable for indoor display. Detailed photography of the finished unit available on request.

Why It Matters

Genuine modern Ferrari F1 chassis never come to market — they remain the property of the Scuderia. For the collector or business who wants the presence of Hamilton's Ferrari in their space, a faithful full-scale replica is the only path. And with the SF-26's retro-inspired livery already being talked about as a future classic, few display pieces combine this much contemporary relevance with this much visual drama.

Specifications

• Scale: 1:1 (full size)
• Construction: resin and fiberglass composite over internal frame
• Livery: Ferrari SF-26 2026-style, Car No. 44 (Lewis Hamilton tribute)
• Type: static display show car (non-running)
• Suitable for: showrooms, dealerships, museums, private collections, commercial display

Freight shipping arranged worldwide. Please enquire for a delivery quotation to your region.

McLaren MP4/4 — Full-Scale (1:1) Show Car Replica

Ayrton Senna Tribute · Car No. 12 · 1988 Marlboro McLaren Honda Livery

Museum-grade resin and fiberglass construction — the most dominant Formula 1 car in history, recreated at full scale.

Presented here is an exceptional full-size (1:1) replica of the McLaren MP4/4, the legendary machine in which Ayrton Senna claimed his first Formula 1 World Championship in 1988. Finished in the unmistakable Marlboro red-and-white livery and carrying Senna's car number 12, this show car captures one of the most celebrated silhouettes in motorsport history.

The MP4/4 remains a statistical anomaly no team has matched since: fifteen wins from sixteen races, fifteen pole positions, and ten one-two finishes across the 1988 season — a level of dominance that defined the Senna–Prost era and cemented the McLaren-Honda partnership in Grand Prix folklore.

The Replica

Hand-built in resin and fiberglass over a rigid internal framework, this display piece reproduces the MP4/4's distinctive low-line profile with remarkable fidelity — from the sculpted nosecone and period-correct front wing endplates to the raised airbox surround, high-mounted rear wing, and full diffuser assembly at the rear. Highlights include:

• Full-scale dimensions faithful to the original car's famously low, reclined driving position and ground-hugging stance
• Complete period livery — Marlboro, Shell, Honda, Boss, and Goodyear markings applied throughout, with race number 12 on the nose, sidepods, and rear wing endplates
• Detailed cockpit area with roll hoop, mirrors, and windscreen surround
• Replica engine detail visible behind the cockpit, evoking the Honda RA168E turbo V6
• Slick-profile display tyres with Goodyear Eagle branding, mounted on black six-spoke-style wheels

The result is a commanding centrepiece: at full scale, the MP4/4's dramatic proportions — barely waist-high, over four metres long — make an extraordinary visual statement in a showroom, private collection, museum, office lobby, or hospitality space.

Condition & Provenance Disclosure

This is a static display replica, newly constructed in resin and fiberglass. It is not a race-used or ex-team chassis, contains no running mechanical components, and is not affiliated with, or endorsed by, McLaren Racing, Honda, or the estate of Ayrton Senna. It is offered strictly as a tribute display piece for collectors and enthusiasts.

The car is structurally sound and suitable for indoor display. Detailed condition photography available on request.

Why It Matters

Original MP4/4 chassis are effectively unobtainable — held by McLaren, Honda, and a handful of institutional collections. For the collector who wants to live with the presence of Senna's championship-winning McLaren, a faithful full-scale replica is the only realistic path — and few subjects reward the treatment like the MP4/4.

Specifications

• Scale: 1:1 (full size)
• Construction: resin and fiberglass composite over internal frame
• Livery: 1988 Marlboro McLaren Honda, Car No. 12 (Ayrton Senna)
• Type: static display show car (non-running)
• Suitable for: showrooms, museums, private collections, commercial display

Freight shipping arranged worldwide. Please enquire for a delivery quotation to your region.

Bring the soul of Ferrari into your space with this Carrozzeria Zanasi Ferrari Rim Coffee Table — a rare fusion of Formula 1 engineering, Italian design, and modern luxury.

Handcrafted using an authentic Ferrari wheel rim finished by Carrozzeria Zanasi, the legendary Maranello-based coachbuilder responsible for Ferrari’s iconic paintwork, this piece transforms genuine motorsport history into a striking statement table.

The rim is paired with a precision-cut tempered glass top, allowing the sculptural details of the wheel to remain fully visible while offering a sleek, functional surface. Mounted on a solid metal base, the table balances industrial strength with refined elegance — perfect for collectors, Ferrari enthusiasts, and high-end automotive interiors.

Set of 2 Ferrari Modena stools limited Edition of 9 units only. This is set 1/9

Dimensions: 85×42×33 cm - (34" x 17" x 13")

This exquisite piece of craftsmanship is a meticulously restored Ferrari 458 crankshaft, exemplifying the highest standards of precision and attention to detail. Every aspect of this crankshaft has been carefully considered, resulting in a fully chromed finish that showcases its engineering excellence. The base is elegantly wrapped in premium Ferrari leather, accentuated with red stitching, further enhancing its luxurious appeal. This remarkable item stands as a bold and striking statement, perfect for any discerning collector or automotive enthusiast.

This exquisite piece of craftsmanship is a meticulously restored Ferrari 246 crankshaft, exemplifying the highest standards of precision and attention to detail. Every aspect of this crankshaft has been carefully considered, resulting in a fully chromed finish that showcases its engineering excellence. The base is elegantly wrapped in premium Ferrari leather, accentuated with red stitching, further enhancing its luxurious appeal. This remarkable item stands as a bold and striking statement, perfect for any discerning collector or automotive enthusiast.

This is an absolutely stunning Ferrari F430 featuring carbon-ceramic brake discs and striking red calipers. The combination of high-performance engineering and meticulous design results in an exquisite realization of automotive excellence. The carbon discs not only enhance the car’s braking capabilities but also add to the overall aesthetic appeal, perfectly complementing the vibrant yellow calipers. Every detail of this vehicle reflects Ferrari's commitment to craftsmanship and performance, making it a true masterpiece on wheels. Whether on the track or on the road, this Ferrari F430 stands as a testament to luxury and precision engineering.

This is an absolutely stunning Ferrari F430 featuring carbon-ceramic brake discs and striking yellow calipers. The combination of high-performance engineering and meticulous design results in an exquisite realization of automotive excellence. The carbon discs not only enhance the car’s braking capabilities but also add to the overall aesthetic appeal, perfectly complementing the vibrant yellow calipers. Every detail of this vehicle reflects Ferrari's commitment to craftsmanship and performance, making it a true masterpiece on wheels. Whether on the track or on the road, this Ferrari F430 stands as a testament to luxury and precision engineering.

Set of 2 Ferrari Scuderia stools.

Finished in high quality black paint and lacquered for absolute smoothness and protection.

Dimensions: 80×45×40 cm - (32" x 18" x 16")
Pair of stools with Scuderia Ferrari pattern.
New, never used, with no scratches nor signs.
Adjustable height: 59 cm - 80 cm.
ABS seat with glossy finish.
Height adjustment lever on one side.

Metal structure with chrome finish.
Very decorative and useful for: shop, office, garage, home. Dimensions:
- Height 59-80 cm (24"- 32")
- Width 43.5 cm (18")
- Depth 39.5 cm (16")

It is a fantastic and rare display piece for your office, showroom, garage or man's cave.

Hand made oil barrel transformed into a unique decorative piece that can also be used as a feature chair.
The piece is finished in high quality Rosso Corsa metallic paint.

• Quality leather seat
• Prancing horse stitching on top of the seat
• Handle for easy opening
• Storage space inside.

Perfect for a game room, garage, mancave, service shop or automotive showroom.

Set of 2 Ferrari Scuderia stools.

It is a fantastic and rare display piece for your office, showroom, garage or man's cave.